Supported Classrooms

Projector On/Off: Press this button to turn the projector On or Off.

Document Camera: Press here to select the document camera for the projected image.

Projector Mute: Press here to instantly blank the projected image. Press again to restore the image.

DVD/VCR: Press here to select the DVD/VCR player for the projected image.

Computer: Press here to select the computer for the projected image after the projector is turned on.

Volume Up: Press here to raise the volume in small increments.

Laptop: Press here to select your laptop output for the projected image. NOTE: external display must be turned on.

Volume Down: Press here to lower the volume in small increments.

Projector On: press lightly to turn the projector on.

Projector Off: press lightly to turn the projector off.

Projector Mute: press lightly to instantly blank the projected image. press again to restore the projected image.

Computer/Laptop: Press lightly to select the computer or laptop for the projected image after the projector is turned on. NOTE: To use a laptop, connect your computer to the cable then turn on your computer. The system will "auto sense" your computer and switch the image from the room computer to your laptop. If this doesn't happen automatically make sure your external display port is active - usually a function key press.

Document Camera: Press lightly to select the document camera for the projected image. NOTE: document camera will need to be turned on.

VCR/DVD: Press lightly to select the DVD/VCR player for the projected image.

Volume Up: Press lightly to raise the volume in small increments. You can also press and hold the button until the desired volume level is reached.

Volume Down: Press lightly to lower the volume in small increments. You can also press and hold the button until the desired volume level is reached.

NOTE: This is the basic layout. Some rooms will vary slightly.

Projector Controls: press lightly on the appropriate button to turn the projector on or off or mute (blank the screen).

Select a Source: press lightly on the appropriate button to have that source displayed on the projected image. NOTE: when you select DVD or VCR a separate window will be displayed on the touch panel to control that device.

Lights: press lightly on the buttons to turn the lights on/off or raise/lower the dimmer. NOTE: each rooms lighting controls are different so this layout may not be the same as in the room.

Screens: In rooms with electric screens press lightly on the appropriate button to raise or lower the projection screen(s).

System Volume: Press lightly on the appropriate button to raise/lower or mute the audio in the room.

Mic Volume: Press lightly on the appropriate button to raise/lower or mute the sound coming from the microphone.